What is Leak Testing?
Many products and parts that we use in our daily life need to pass leak tests during mass production.
Conversion from Traditional Methods to Measurable Leak Tests
Since the leak tests performed with traditional methods are not measurable and are left to the operator’s subjectivity, it turns into a useless method, especially in mass production lines.
Test Parameters Determination
The first and most important step is to determine the test parameters for the product while performing the leak tests of a product during the production phase.
Is a “0” Leakage Rate Possible in Leak Tests?
Leak tests, a non-destructive testing method, are applied to products produced in many industries. At this point, manufacturers who invest in leak test equipment may expect “0” leaked products.
Who is Adlema?
Adlema, which is an expert in leak testing systems, is a fast-growing company that adds added value to the Turkish Industry.
Electric Vehicles and Leak Testing
Electric Vehicles and Leak Testing Electric vehicles have emerged because of the age of technology. In response to the need to create a sustainable future, engines that do not consume petrol, save fuel, operate with high efficiency and silence have been designed. Electric vehicles powered by this engine and battery are preferred more and more […]
Leak Test System Selection
Leak Test System Selection Many products must have leak-proof properties. It is an important quality control method to subject all products produced in the production process to leak testing. When performing leak tests, it is not the “0” leakage of the product that is sought, but its safe and functional operation in accordance with the […]
Understanding the Leak Testing Data
Leak testing devices automatically decide whether the parts are leaky according to the specified parameters. Various steps can be taken to check that the test is done correctly.
Negative Leak Rate in Leak Testing
Negative Leak Rate in Leak Testing Before delving into the causes of negative leak rate, we should first explain what negative leak rate is and how it is calculated. Negative leak rate occurs when the pressure drop of the part being tested is less than that of the leak-free reference part. Negative flow occurs when […]
IP67 and Sealed Products Leak Tests
IP67 and Sealed Products Leak Tests In our blog post ‘Leak sealing of electronic products’, we talked about IP67 tests, hermeticity and why electronic products should undergo sealing tests. In this blog post, we will talk about the appropriate methods that can be used for IP67 leak tests for sealed products. Ideal […]
